Enzymatic browning reactions in apple and apple products

This review examines the parameters of enzymatic browning in apple and apple products that is, phenolic compounds, polyphenoloxidases, and other factors (ascorbic acid and peroxidases), both qualitatively and quantitatively. Then the relationships between intensity of browning and the browning parameters are discussed, including a paragraph on the methods used for browning evaluation. Finally, the different methods for the control of browning are presented.     

Study of the natural occurrence of T-2 and HT-2 toxins and their glucosyl derivatives from field barley to malt by high-resolution Orbitrap mass spectrometry

This paper reports a new method for the determination of T-2 and HT-2 toxins and their glucosylated derivatives in cereals, and some survey data aimed at obtaining more comprehensive information on the co-occurrence of T-2 and HT-2 toxins and their glucosylated derivatives in naturally contaminated cereal samples. For these purposes, barley samples originating from a Northern Italian area were analysed by LC-HRMS for the presence of T-2, HT-2 and relevant glucosyl derivatives. Quantitative analysis of T-2 and HT-2 glucosides was performed for the first time using a recently made available standard of T-2 glucoside. The glucosyl derivative of HT-2 was detected at levels up to 163 µg kg^–1 in 17 of the 18 analysed unprocessed barley grains, whereas the monoglucosyl derivative of T-2 toxin was detected in only a few samples and at low µg kg^–1 levels. The ratio between glucosylated toxins (sum of T-2 and HT-2 glucosides) and native toxins (sum of T-2 and HT-2) ranged from 2% to 283%. Moreover, taking advantage of the possibility of retrospective analysis of full-scan HRMS chromatograms, samples were also screened for the presence of other type-A trichothecenes, namely neosolaniol, diacetoxyscirpenol and their monoglucosyl derivatives, which were detected at trace levels. A subset of nine different samples was subjected to micro-maltation in order to carry out a preliminary investigation on the fate of T-2, HT-2 and relevant glucosides along the malting process. Mycotoxin reduction from cleaned barley to malt was observed at rates ranging from 4% to 87%.     

Distribution of T-2 and HT-2 toxins in milling fractions of durum wheat

The effect of processing on mycotoxin content in milling fractions has been investigated in 10 samples of durum wheat contaminated with T-2 and HT-2 toxins at levels ranging from 97 to 5,954 μg/kg (sum of T-2 and HT-2 toxins). Either naturally contaminated samples or samples artificially inoculated with Fusarium sporotrichioides under field conditions were used. A method based on liquid chromatography-tandem mass spectrometry coupled with immunoaffinity column cleanup was validated in-house for the simultaneous analysis of both toxins in a variety of matrices, including uncleaned wheat, cleaned wheat, screenings, bran, red dog, fine middlings, and semolina. Mean recoveries from samples spiked with T-2 and HT-2 toxins at levels of 100 μg/kg ranged from 85 to 107%, with relative standard deviations (RSDs) lower than 14%. The milling process led to an increase of T-2 and HT-2 toxin contents up to 13- and 5-fold in screenings and bran, respectively, compared with occurrence in the uncleaned wheat; however, an overall reduction of T-2 and HT-2 toxins by 54% (RSD, 20%) and 89% (RSD, 3%) was observed in cleaned wheat and in semolina, respectively.     

14C labelling of lignins of normal and bm3 maizes for fermentation studies

[U-¹⁴C] phenylalanine (phe*) and [O¹⁴CH₃] sinapic acid (sin*) were infused into the cut ends of normal and bm3 maizes (anthesis stage) under or above the last node or at mid-internode, with or without the leaf, in light or in darkness. Radioactivity was measured in the organs, and in phenolic constituents of the cell wall and saponified residues of the bases and tops of the apical inter-node. In both maize genotype labelled under the node the radioactivity was distributed more evenly in the organs with sin* than with phe*. Infusion above the node and at mid-internode greatly increased radioactivity in the bases and tops, respectively. Removal of the leaf only slightly increased the radioactivity, mainly in the bases, and no clear-cut effect of darkness was observed. Phe* labelled the phenolic acids and the three lignin units, but the syringyl units of bm3 maize were only slightly labelled. Sin* specifically labelled the syringyl units, which represented the least condensed fraction of lignins. Both the native and labelled lignins were highly alkali soluble. There were differences in lignin biogenesis between the bases and tops, and between normal and bm3 maizes. The newly formed lignins were slightly different from the native lignins but had similar types of heterogeneity, with variations in the internode and between genotypes similar to those in native lignins. Provided due allowance is made for the distinguishing characteristics of newly formed lignins, the [¹⁴C-lignin] cell walls, which are strongly labelled on complementary structures, seem suitable model substrates for fermentation studies.     

Electrochemical reduction of hexahydro-1,3,5-trinitro-1,3,5-triazine in aqueous solutions

Electrochemical reduction of RDX, hexahydro-1,3,5-trinitro-1,3,5-triazine, a commercial and military explosive, was examined as a possible remediation technology for treating RDX-contaminated groundwater. A cascade of divided flow-through cells was used, with reticulated vitreous carbon cathodes and IrO2/Ti dimensionally stable anodes, initially using acetonitrile/water solutions to increase the solubility of RDX. The major degradation pathway involved reduction of RDX to the corresponding mononitroso compound, followed by ring cleavage to yield formaldehyde and methylenedinitramine. The reaction intermediates underwent further reduction and/or hydrolysis, the net result being the complete transformation of RDX to small molecules. The rate of degradation increased with current density, but the current efficiency was highest at low current densities. The technique was extended successfully both to 100% aqueous solutions of RDX and to an undivided electrochemical cell.     

Determination of Deoxynivalenol and Nivalenol in Wheat by Ultra-Performance Liquid Chromatography/Photodiode-Array Detector and Immunoaffinity Column Cleanup

An ultra-performance liquid chromatography (UPLC®) method has been developed for the simultaneous determination of deoxynivalenol (DON) and nivalenol (NIV) in wheat. Ground sample was extracted with water and the filtered extract was cleaned up through an immunoaffinity column containing a monoclonal antibody specific for DON and NIV. Toxins were separated and quantified by UPLC® with photodiode-array detector (λ?=?220 nm) in less than 3 min. Mean recoveries from blank wheat samples spiked with DON and NIV at levels of 100–2,000 μg/kg (each toxin) ranged from 85 to 95 % for DON and from 81 to 88 % for NIV, with relative standard deviations less than 7 %. Similar recoveries were observed from spiked samples when methanol/water (80:20, v/v) was used as extraction solvent. However, by using a wheat sample naturally contaminated with DON and NIV, the one-way analysis of variance (Student–Newman–Keuls test) between different extraction solvents and modes showed that water extraction provided a significant increase (P?<?0.001) in toxin concentrations (mean values of six replicate analyses) with respect to methanol/water (80:20, v/v). No significant difference was observed between shaking (60 min) and blending (3 min). The limit of detection (LOD) of the method was 30 μg/kg for DON and 20 μg/kg for NIV (signal-to-noise ratio 3:1). The immunoaffinity columns showed saturation of DON/NIV binding sites at levels higher than 2,000 ng in blank wheat extracts spiked with the corresponding amount of mycotoxin, as single mycotoxin or sum of DON and NIV. The range of applicability of the method was from LOD to 4,000 μg/kg, as single mycotoxin or sum of DON and NIV in wheat. The analyses of 20 naturally contaminated wheat samples showed DON contamination in all analyzed samples at level ranging from 30 to 2,700 μg/kg. NIV was detected in two samples at negligible toxin levels (up to 46 μg/kg). This is the first UPLC® method using immunoaffinity column cleanup for the simultaneous and sensitive determination of DON and NIV in wheat.     

Determination of Deoxynivalenol in Wheat Bran and Whole-Wheat Flour by Fluorescence Polarization Immunoassay

A rapid and accurate fluorescence polarization (FP) immunoassay has been optimized for the determination of deoxynivalenol (DON) in wheat bran and whole-wheat flour. A preliminary treatment with activated charcoal was used to eliminate the strong matrix effect due to highly colored interfering compounds present in raw wheat bran extracts. In particular, matrix effect was removed by adding activated charcoal to the wheat bran extract (3.5 mg/mL) and mixing for 3 min of incubation time prior to the FP immunoassay analysis. No preliminary treatment was necessary for whole-wheat flour. Average recoveries from samples spiked with DON at levels of 500, 1,000, and 1,500 μg/kg were 95 % for wheat bran and 94 % for whole-wheat flour, with relative standard deviation generally lower than 13 %. Limits of quantification of the optimized FP immunoassay were 120 μg/kg for both matrices. The overall time of analysis was lower than 15 min for wheat bran and 10 min for whole-wheat flour. Good correlations (r?>?0.971) were observed between DON contents obtained by both FP immunoassay and high-performance liquid chromatography with immunoaffinity cleanup for 37 and 23 samples of naturally contaminated wheat bran and whole-wheat flour, respectively. These results show that the FP immunoassay is suitable for high-throughput screening as well as for quantitative determination of DON in wheat bran and whole-wheat flour.     

Determination and validation of micro-forming limit diagrams for very thin materials

As a result of an increasing industrial demand for very small parts, this paper proposes an extension of the concept of forming limit diagrams for very thin sheets (thicknesses of 0.1 mm) called micro-forming limit diagrams (MFLD). A specific drawing tool of small size was designed and subsequently achieved in the laboratory. The formability of a rolled and annealed 1050A aluminum sheet (99.5%) was characterized and analyzed. Seeing the size of the specimen and the tool, the spacer is replaced by a central electro-discharged smaller thickness. The micro-forming press was coupled with a system for strain measurements based on image analysis with a correlation method. After experimental tests with 7 different geometries, the strains were determined at the beginning of the necking from the various images. Based on this, three methods of determination of the MFLD were proposed (white pixel emergence, polynomial method and strain profile analysis) and compared. Finally, an experimental deep drawing cylindrical cup test rendered it possible to validate the most accurate method for determining the micro-forming limit diagram.